Yes, Paslode nails can fit in Dewalt nail guns. In fact, DeWalt states explicitly that their nail guns are compatible with a wide range of nails from other manufacturers, including Paslode. The only thing that has to be right is that the nails have to be the right size and shape for the nail gun.
To use Paslode nails in a Dewalt nail gun, you must ensure that the nails are the correct length and gauge. Paslode nails are typically 16 gauge, but 15 gauge and 18 gauge options are also available. The length of the nails should be within the range specified for the nail gun. For example, the DeWalt DCN692 20V Framing Nailer can use nails from 2 inches to 3-1/2 inches long.
In this article, we will explore whether Paslode nails fit Dewalt nail guns, how to use them, and some valuable tips for seamless operation. Let’s get started!
CAN YOU USE PASLODE NAILS IN DEWALT NAIL GUN?
Using the correct type of nails designed for your specific nail gun is essential. It can ensure proper functionality, safety, and optimal performance. Paslode nails are typically designed for use with Paslode nail guns. DeWalt nail guns are made to work with DeWalt nails or nails that the maker says are compatible.
Putting the wrong kind of nails in a nail gun can cause a number of problems, such as:
- Jamming
- Misfiring
- Or Even Potential Damage To The Tool.
It can also void the warranty of both the nail gun and the nails themselves.
Make sure you read the instructions for your DeWalt nail gun to make sure you’re using the right nails. This information should tell you what kinds and sizes of nails will work with your model.
How Can You Use Paslode Nails in a Dewalt Nail Gun?
Here are the steps on how to use Paslode nails in a Dewalt nail gun:
- Make sure your nailer is compatible with Paslode nails.
- Load the nailer with Paslode nails.
- Set the nailer to the correct setting.
- Hold the nailer in one hand and the material you’re nailing in the other hand.
- Aim the nailer at the fabric and pull the trigger
- The nail will drive into the fabric.
- Repeat steps 5 and 6 until you’re finished nailing.
TIPS FOR USING PASLODE NAILS INSTEAD OF DEWALT NAILS
Sure, here are some tips for using Paslode nails instead of DeWalt nails:
Make sure your nailer is compatible with Paslode nails.
Not all nailers are compatible with all types of nails. Paslode nails have a rounded drive tip, while DeWalt nails have a clipped drive tip. If you try to use Paslode nails in a DeWalt nailer, the nails may not drive flush or may even jam the nailer.
Use the correct length of the nail.
Paslode nails come in various lengths, so using the right size for your job is essential. If you use excessively lengthy nails, the wood may fracture. If you use nails that are too short, they may not hold the material together as well.
Use the correct setting on your nailer.
Paslode nailers have a variety of settings that allow you to adjust the power of the nailer. If you’re using Paslode nails in a DeWalt nailer, you’ll need to find the best setting.
Be careful not to over-drive the nails.
Paslode nails are designed to drive flush with the surface of the wood. If you over-drive the nails, they may split the wood.
Here are some additional suggestions that could prove useful:
- Use a Brad nailer for smaller projects. A Brad nailer is a smaller, lighter nailer ideal for smaller projects, such as trim work.
- Use a framing nailer for larger projects. A framing nailer is a larger, heavier nailer ideal for larger projects like framing a house.
- Take your time and be careful when using a nail gun.If not used appropriately, nail weapons can be hazardous. Always wear safety glasses and take your time when using a nail gun.
I hope these tips help you use Paslode nails in your DeWalt nailer.
CAN YOU USE BOTH PASLODE NAILS AND DEWALT NAILS AT THE SAME TIME?
No, it is not recommended to use both Paslode nails and Dewalt’s nails at the same time. Mixing different brands of nails can cause problems with the nail gun, such as jamming or misfires. Sticking one brand of nails for a particular nail gun is best.
Here are some of the reasons why you should not use both Paslode nails and Dewalt’s nails at the same time:
- The nails may not be the same size or type. This can cause the nail gun to jam or misfire.
- The nails may not be properly collated. This can also cause the nail gun to jam or misfire.
- The nails may not be made of the same material. This can cause the nails to corrode at different rates, leading to problems with the nail gun.
If you use a nail gun designed for both Paslode and Dewalt nails, you can use both brands of nails. Even so, it’s not a good idea to mix the nails. Sticking one brand of nails for a particular nail gun is best.
FAQ
What Nails Fit in a Dewalt Nail Gun?
Dewalt nail guns are compatible with Dewalt nails that match the gun’s specifications regarding length and gauge.
What Nails Are Compatible with Paslode?
Paslode nail guns are made to work with Paslode nails, which are made to work best.
Conclusion
In conclusion, Paslode nails can indeed be used in Dewalt nail guns. It provided you take the necessary precautions and adjustments. Always ensure the compatibility of the nails. Follow the correct procedures for smooth operation. Using the right nails ensures your nail gun lasts for a long time and gets great results from your projects.